ALTERNATIVE NAMES

X2CrNiMo17-12-2
1.4404
ASTM A276

Material Characteristics

The stainless austenitic steel 316L has a good resistant to corrosion. It can be used for temperatures up to 550 °C. Due to its resistance to intergranular corrosion at temperatures below 300 °C, this material is frequently used in chemical, pharmaceutical and food industry applications. The good weldability of 316L leads to an excellent processability in Laser Powder Bed Fusion and a wide applicability.

PropertiesUnitAs built 1)Heat-treated 2)
Tensile Strength RmMpa650 ±30580 ±30
Yield Strength Rp0,2MPa550 ±30350 ±30
Elongation at Break A5%45 ±555 ±5
Young‘s Modulus EGPa185 ±5190 ±5
Charpy Notch Toughness AvJ130 ±10-
Hardness HV210 ±5175 ±5


  1. The specified material properties were determined at room temperature. They are multidimensionally dependent on many different machine and process parameters. Without further investigation, the material properties do not constitute a sufficient basis for component dimensioning.
  2. Specific heat treatment processes lead to optimized mechanical-technological properties to meet the component requirements.

Chemical Composition

ElementMass Fraction [%]
Ni10.0 - 14.0
Cr16.0 - 18.0
Ni≤ 0.1
Mo2.0 - 3.0
C≤ 0.03
Si≤ 1.0
Mn≤ 2.0
P≤ 0.045
S≤ 0.03
FeBalance


Rosswag Engineering offers a holistic and fully integrated process chain for Additive Manufacturing services. Our portfolio ranges from manufacturing of your prototypes, tools and small serial products to an individual consulting and engineering process for the choice of material, parameters and process chain.

 
Call +49 7240 9410-131Send E-Mail info@rosswag-engineering.de Rosswag Engineering on LinkedId LinkedInNewsletter Newsletter
Privacy Settings
Cookies enable an optimal website experience. Read more: Privacy policy
YouTube...
Google Maps...
Statistics...